In battery module manufacturing, it is no longer sufficient to ask whether a given technology works. What matters far more today is whether it operates efficiently, cost-effectively, and with scalability in mind. For many years, resistance welding remained the standard solution across numerous applications. However, more companies are now evaluating not only the capital cost of equipment, but also the total cost of implementation, maintenance, operation, and process quality.
This leads to a key question: is resistance welding still cost-effective, particularly in battery module production?
The answer is not straightforward. It depends on production scale, quality requirements, and development strategy.
In many cases, however, laser technology is emerging as a more predictable and advantageous solution in the long term.
Resistance Welding. A Proven Technology - but with Limitations
Resistance welding is a well-established and widely used method in industrial manufacturing. It is based on heat generated by electrical resistance at the joint interface. This approach can be effective, particularly in simpler applications and where precision requirements are lower.

The challenge arises when scaling production.
A key limitation of this technology is the cycle time required to complete a single weld, which results from multiple process stages: electrode clamping, current flow, cooling, and joint stabilization. Each of these steps extends the operation and limits the maximum throughput.
In practice, this means that a single unit has a fixed throughput that cannot be significantly increased without redesigning the entire production architecture.
In battery module manufacturing-where the number of weld points is very high-this limitation quickly becomes critical. As a result, multiple machines must operate in parallel.
Additional challenges stem from material constraints. Resistance welding requires specific electrical and thermal conductivity properties, which limits material compatibility.
In practice, issues arise with:
pure copper - high thermal conductivity makes localized heating difficult
aluminum - oxide layers and conductivity can cause instability
copper-to-aluminum joints - difficult due to oxide layers and melting differences
As quality and material requirements increase, these limitations become more pronounced.
Technology Comparison: Resistance Welding vs. Laser Welding
The differences are most apparent in real-world applications.
| Criterion | Resistance Welding | Laser Welding |
|---|---|---|
| Weld cycle time | Longer (mechanical cycle + cooling) | Significantly shorter (clamping, Z-axis measurement - ensuring zero gap) |
| Single-machine throughput | Limited | High |
| Number of units required for scaling | Requires multiple stations | Usually one |
| Space requirements | Higher (more stations) | Lower, more compact |
| Number of operators | Often several | Often one operator, automation possible |
| Process precision | Good, but limited | Very high |
| Heat impact on material | Can be higher | Minimal |
| Maintenance costs | Increase with number of machines; electrode wear | Lower relative to throughput |
| Scalability | Requires line expansion | Easier to scale throughput |
| Materials | Steels (carbon, stainless), nickel strips and tapes, copper in limited cases, aluminum - restricted use (thin layers/coated materials) | Most metals including Cu, Al, and dissimilar joints (e.g., Cu-Al) |
The comparison shows that the key distinction lies in unit process efficiency, which determines overall production architecture.
Where Do Hidden Costs Appear?
At first glance, purchasing a single resistance welding machine may seem more attractive. However, equipment price alone does not reflect total cost.
At higher production volumes, the following factors must be considered:
the need to purchase multiple machines
increased floor space requirements due to multiple workstations
higher maintenance and service costs
greater consumption of wear parts
more operators required to run the process
As a result, a technology with a lower upfront cost may generate higher total costs.
Why Laser Welding Better Meets Battery Production Needs
Battery module manufacturing today demands precision, repeatability, and strict quality control.
Laser welding offers several clear advantages:
reduced heat impact on the material
smaller production footprint
simplified production organization
fewer operators required
fewer machines needed
lower total cost of ownership
For these reasons, laser technology is increasingly viewed as an investment in productivity and scalability.
When Does Resistance Welding Still Make Sense?
Despite the advantages of laser welding, resistance welding is not obsolete. It can still be a good choice in cases of:
low production volumes
limited initial budget
less demanding applications
low weld density processes
However, as production scale increases, limitations in cycle time and throughput become critical.
Summary
Resistance welding remains useful, but is increasingly being outperformed by more advanced solutions.
When companies evaluate total cost-including efficiency, number of machines, space, and operations-laser welding often proves more favorable.
Material considerations are also crucial. Resistance welding performs well with steels and some aluminum, but struggles with:
pure copper
copper-to-aluminum joints
In these cases, laser welding offers greater flexibility and stability.
As a result, the key question is no longer: “Which technology is cheaper upfront?” but rather: which technology is more cost-effective long term?
Increasingly, the answer points toward laser welding.

Looking for proven laser welding solutions? See the Battery Welder series or contact us: sales@myrma.eu
DOWNLOADS
WHERE THIS APPLIES
KEEP READING
More from Knowledge

KNOWLEDGE · GUIDE
Laser Welding - How It Works, Parameters and Automation
A guide to laser welding in industrial manufacturing: working principle, key process parameters, materials, comparison with TIG, MIG and resistance welding - and the path from trials to automated series production.
Read more →
KNOWLEDGE · APPLICATION NOTE
Laser Focal Point Measurement for Battery Welding - Methods Compared
On 250-300 µm copper and aluminum, the focal position decides whether a battery weld is stable. Here is why the focal point of a single-mode laser is so hard to locate, how much accuracy the process really needs - and how the three practical measurement methods compare on precision, objectivity and cost.
Read more →
KNOWLEDGE · APPLICATION NOTE
Laser Welding of Aluminum - Process Stability and Repeatability
What makes aluminum demanding for laser welding, which parameters set the energy balance, and how to define a process window that holds in series production - with RMA's indicative parameter ranges and a defect troubleshooting table.
Read more →